MP Series – Piece and Roll to Roll Transfer Printing Machine – MP17B320C

MP Series – Piece and Roll to Roll Transfer Printing Machine – MP17B320C

MP-17B320C Poza 1

Product Information

Our latest “MP” series has been created for small to medium size businesses that are keen to produce more of their own products inhouse and minimise the need to outsource. Whilst mainly used for textile transfer printing, the MP Series can also be used for other heat transfer applications.

OPERATION TYPES
  • Digital Paper Rolls to Pieces of Fabric
  • Digital Paper Rolls to Rolls of Fabric
  • Digital Paper Pieces to Pieces of Fabric

OTHER SCOPES OF USE

  • Film Lamination
  • Serigraphy Transfer Printing
  • Offset Printing
  • Stone Printing
  • Flock Transfer
poza 4

THE DRUM

The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or Teflon. Inside the drum is one single heating unit that consists of three pieces.
The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage. The heat sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily adjusted via the Touch-Screen Panel.

THE FELT BELT

All of our machines are equipped with 100% Nomex seamless industrial felt belts that are reinforced with Kevlar material in order to avoid stretching. The expected lifetime for the belt on this unit is between 3 & 5 years depending on use. In order to eliminate movement of the felt belt to either side the machine is built with an automated-felt centering mechanism. The felt tension and the felt centering system are both airoperated (Pneumatic). Should the compressor fail to supply the required air for the system, the machine halts and alerts the operator to prevent lasting damage to the belt.

poza 9
 TOUCH-SCREEN PANEL
  • General control of the machine such as speed, temperature etc.
  • Metre Counter
  • Weekly Programming
  • Auto- Cooling
  • Touch-screen to Access various functions

MATERIAL INPUT / OUTPUT CONTROLS

Protection Paper
  • Input      : Manually Adjusted Brake System
  • Output   : Manually Adjusted Automatic Rewind
Digital Paper
  • Input      : Manually Adjusted Brake System
  • Output   : Manually Adjusted Automatic Rewind

Roll Fabric

  • Input      : Manually Adjusted Fabric Tension System
  • Output   : Manually Adjusted Automatic Rewind

Piece Fabric

  • Input      : Manually laid on table
  • Output   : Off the protection paper

Technical Specification

Heating System Heat transfer oil
Max. temperature 220
Average heating time 60-80 min
Average Cooling time 150 min
Power supply 380 VAC – 3 Ph 50/60 Hz  or 220 VAC – 3 Ph 50/60 Hz
Air intake (bar) 5 – 8 bar
Electrical System PLC Control
Felt Tension System Pneumatic
Felt Control System Automatic
Drive Speed Control AC Inverter
Paper un-wind Re-wind Compressed Shaft
Weekly programming Yes
Automatic shut –down Yes
Safety 4 Emergency Buttons – Safety Wire
Software language English (optional)
Warranty 2 years Mechanical, 1 year Electrical (User Fault Exempted)
 

Optional accessories

  1. Static electricity preventing wire: static electricity generated on fabric or paper is not to harm the user.
  2. Glass table and lightening: it provides convenience when laying piece fabrics on the table
  3. Ventilation hood: it assures that the fume generated during printing do not spread around
  4. Remote access module: it is a card module installed on the PLC. The machine is easily accessible remotely as long as it is installed
  5. Air Shaft : it is used to fix the roll with air to prevent the roll papers balls from rotating
  6. Chrome or Teflon plated drum: film lamination or interlining and so on. Ideal for those do the work. Such adhesive materials can be easily removed from the chrome cylinder.
  7. UPS power supply

MP SERIES
Machine Drum Diameter Drum Width Maximum Working Width Working Data Maximum Current Input Total Power Avarage Energy Power Drum Resistance Power Drum Engine Power Dimensions (Footprint with Table) Net Weight Dimensions of the Shipping Crate
Code mm inch mm inch mm m/min m/hour m2/hour Amp. Kw Kw Kw Kw Cm Kg Cm Kg
MP-13B320C 320 12.6″ 1300 51.2″ 1200 2.10 126 151 22,8 15 9,75 13,5 0,75 220x180x130 750 245x130x155 825
MP-17B320C 1700 66.9″ 1600 2.10 126 202 30,4 20 13 18,5 0,75 260x180x130 1100 285x130x155 1210
MP-19B320C 1900 74.8″ 1800 2.10 126 227 38 25 16,25 23,5 0,75 280x180x130 1320 305x130x155 1450
MP-22B320C 2200 85.6″ 2100 2.10 126 265 45,6 30 19,5 28,5 0,75 310x180x130 1540 335x130x155 1695